|
|
درباره ارمگان
تجیزات و امکانات |
 |
|
|
 |
|
|
MAGNETIC PARTICLE
ANSI
ANSI/ASTM A275, Magnetic
Particle Examination of Steel Forgings
ANSI/ASTM A456, Magnetic Particle Inspection of Large Crankshaft
Forgings
ANSI/ASTM E125, Reference Photographs for Magnetic Particle Indications
on Ferrous Castings
ANSI/ASTM E269, Definition of Terms Relating to Magnetic Particle
Inspection
API
API 5A, Specification
for Casing, Tubing, and Drill Pipe
API 5AC, Specification for Restricted Yield Strength Casing and Tubing
API 5AX, Specification for High Strength Casing, Tubing, and Drill Pipe
API 5L, Specification for Line Pipe
API 5LU, Specification for Ultra High-Test Heat Treated Line Pipe
API RP 5A5, Recommended Practice for the Field Inspection of New Casing,
Tubing, and Plain End Drill Pipe
ASTM
A275, Magnetic Particle
Examination of Steel Forging
A456, Magnetic Particle Inspection of Large Crankshaft Forgings
E45, Standard Practice for Determining the Inclusion Content of Steel
E125, Standard Reference Photographs for Magnetic Particle Indications
on Ferrous Castings
E269, Definition of Terms Relating to Magnetic Particle Inspection
E709, Standard Recommended Practice for Magnetic Particle Examination
ASME
Sec. I, Boiler and
Pressure Vessel Code, Power Boilers
Sec. III, Boiler and Pressure Vessel Code, Nuclear Vessels
Sec. IV, Boiler and Pressure Vessel Code, Nondestructive Examination
Sec. VIII, Div. 1, Boiler and Pressure Vessel Code, Unfired Pressure
Vessels
Sec. VIII, Div. 2, Boiler and Pressure Vessel Code, Alternative Rules
for Pressure Vessels
Sec. XI, Boiler and Pressure Vessel Code, Alternative Rules for
In-Service Inspection of Nuclear Power Plant Components
PENETRANTS
ANSI
B31.1, Power Piping
B31.3, Petroleum Refinery Piping
ANSI/ASTM E433, Reference Photographs for Liquid Penetrant Inspection
G60.4, Liquid Penetrant Inspection of Steel Forgings
Y32.17, Nondestructive Testing Symbols
ASME
Sec. I, Boiler and
Pressure Vessel Code, Power Boilers
Sec. III, Boiler and Pressure Vessel Code, Nuclear Vessels
Sec. V, Boiler and Pressure Vessel Code, Nondestructive Examination
Sec. VIII, Div. 1, Boiler and Pressure Vessel Code, Unfired Pressure
Vessels
Sec. VIII, Div. 2, Boiler and Pressure Vessel Code, Alternative Rules
for Pressure Vessels
Sec. IX, Boiler and Pressure Vessel Code, Welding and Brazing
Qualifications
ASTM
D129, Determination of
Sulfur Impurities
D808, Determination of Halogenated Compounds
D1266, Lamp Method for Determining Total Sulfur Content
D1317, Test for Sodium Alcoholate Method, Part 17 of the ASTM Standards,
1968
D1552, Determination of Sulfur Impurities
D2441, Hydrolyzable Chlorine in Compounds by Refluxing Test for, Part 29
of ASTM Standards, 1968
D2441, Determination of Water-Leachable Chlorides
D2512, LOX Compatibility
E165, Standard Recommended Practice for Liquid Penetrant Inspection
E270, Definition of Terms Relating to Liquid Penetrant Inspection
E433, Reference Photographs for Liquid Penetrant Inspection
F97, Recommended Practices for Determining Hermeticity of Electronic
Devices by Dye Penetration
G46, Recommended Practice for Examination and Evaluation of Pitting
Corrosion
AWS
A2.4, Nondestructive
Testing Symbols
A5.10, Specifications for Aluminum and Aluminum Alloy Welding Rods and
Bare Electrodes: Aluminum X-Ray Standard
PENETRATING
RADIATION
API
API 1104, Standard for
Welding Pipelines and Related Facilities
API 5L, Specification for Line Pipe
ASME
Sec. I, Boiler and
Pressure Vessel Code, Power Boilers
Sec. III, Boiler and Pressure Vessel Code, Nuclear Power Plant
Components
Sec. V, Boiler and Pressure Vessel Code, Nondestructive Examination
Sec. VIII, Boiler and Pressure Vessel Code, Pressure Vessels
Sec. IX, Boiler and Pressure Vessel Code, Welding and Brazing
Qualifications
Sec. XI, Boiler and Pressure Vessel Code, Rules for In-Service
Inspection of Nuclear Power Plant Components
ASTM
E94, Standard
Recommended Practice for Radiographic Testing
E142, Standard Method for Controlling Quality of Radiographic Testing
E155, Standard Reference Radiographs for Inspection of Aluminum &
Magnesium Castings
E186, Standard Reference Radiographs for Heavy Walled (2 to 4.5 in.-51
to 114 mm) Steel Castings
E192, Standard Reference Radiographs of Investment Steel Castings for
Aerospace Applications
E242, Standard Reference Radiographs for Appearances of Radiographic
Images as Certain Parameters Are Changed
E272, Standard Reference Radiographs for High-Strength Copper Base and
Nickel Copper Alloy Castings
E280, Standard Reference Radiographs for Heavy Walled (4.5 to 12 in.-114
to 305 mm) Steel Castings
E310, Standard Reference Radiographs for Tin Bronze Castings
E390, Standard Reference Radiographs for Steel Fusion Welds
E431, Interpretation of Radiographs of Semiconductors and Related
Devices
E446, Standard Reference Radiographs for Steel Castings up to 2 in. (51
mm) in Thickness
E505, Standard Reference Radiographs for Inspection of Aluminum and
Magnesium Die Castings
E545, Standard Method for Determining Image Quality in Thermal Neutron
Radiographic Testing
E586, Standard Definitions of Terms Relating to Gamma and X-Radiography
E592, Standard Guide to Obtainable ASTM Equivalent Penetrameter
Sensitivity for Radiography of Steel Plates 0.25 to 2 in. (6 to 51 mm)
Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt 60
Method of Test for Hermeticity of Electronic Devices by Dye Penetration
E689, Reference Radiographs for Ductile Iron Castings
E746, Determining the Relative Image Quality Response of Industrial
Radiographic Film
E747, Controlling Quality of Radiographic Testing Using Wire
Penetrameters
E748, Thermal Neutron Radiography of Materials
E80l, Controlling Quality of Radiographic Testing of Electronic Devices
E802, Reference Radiographs of Gray Iron Castings up to 4.5 in.
E803, Determining the UD Ratio of Neutron Radiographic Beams
E999, Guide for Controlling the Quality of Industrial Radiographic Film
Processing
E1000, Guide for Radioscopic Real Time Imaging
E1025, Practice for Hole-Type Image Quality Indicators Used for
Radiography
E1030, Test Method for Radiographic Testing of Metallic Castings
E1032, Method for Radiographic Examination of Weldments
E1079, Practice for the Calibration of Transmission Densitometers
E1114, Method for Determining the Focal Size of lridium-192 Industrial
Radiographic Sources
E1161, Test Method for Radiographic Testing of Semiconductors and
Electronic Components
E1165, Test Method for Measurement of Focal Spots of Industrial X-Ray
Tubes by Pinhole Imaging
G46, Recommended Practice for Examination and Evaluation of Pitting
Corrosion
AWS
A2.4, Symbols for
Welding, Brazing and Nondestructive Examination
B1.10, Guide for the Nondestructive Inspection of Welds
A5.10-69, Specifications for Aluminum and Aluminum Alloy Welding Rods
and Bare Electrodes: Aluminum X-Ray Standard
BSI
BS 1881 Part 250,
Recommendations for the Radiography of Concrete
BS 2600 Part 1, Radiographic Examination of Fusion Welded Butt Joints in
Steel-Methods for Steel 2 mm Up to and Including 50
mm Thick
BS 2600 Part 2, Radiographic Examination of Fusion Welded Butt Joints in
Steel-Over 50 mm Up to and Including 200 mm Thick
BS 2737, Terminology in Internal Defects in Castings as Revealed by
Radiography
BS 2910, Radiographic Examination of Fusion Welded Circumferential Butt
Joints in Steel Pipes
BS 3490, Specification for Sizes, Quantity Packing and Labeling of Film
for Industrial Radiography
BS 3683, Glossary of Terms Used in Nondestructive Testing
BS 3683 Part 3, Radiological Flaw Detection
BS 3971, Specification for Image Quality Indicators for Industrial
Radiography (including guidance on their use)
BS 4408, Recommendations for Nondestructive Methods of Test for Concrete
BS 4408 Part 3, Recommendations for Nondestructive Methods of Test for
Concrete-Gamma Radiography of Concrete
BS 5230, Method for the Measurement of Speed and Contrast of Direct-Type
Films for Industrial Radiography
BS 5411 Part 12, Beta Backscatter Method for Measurement of Thickness
BS 5650, Specification for Apparatus for Gamma Radiography
DIN
DIN 54 109 Part 1,
Nondestructive Testing; Image Quality of Radiographs of Metallic
Materials; Concepts, Image Quality Indicators; Determination of Image
Quality Index
DIN 54 109 Part 2, Nondestructive Testing; Image Quality of X-Ray and
Gamma Ray Radiographs of Metallic Materials; Directions for Formation of
Image Quality Classes
DIN 54 111 Part 1, Testing of Metallic Materials by X-Rays or Gamma
Rays-Weldments
DIN 54 111 Part 2, Testing of Metallic Materials by X-Rays or Gamma
Rays-Castings
DIN 54 112, Nondestructive Testing; Films, Intensifying Screens,
Cassettes for X-Ray and Gamma Ray Radiography; Dimensions
DIN 54 116 Part 1, Nondestructive Test Methods; Viewing of Radiographs;
Viewing Conditions
DIN 54 116 Part 2, Nondestructive Test Methods; Viewing of Radiographs;
Viewing Apparatus
ULTRASONICS
ANSI
B31.1, Power Piping
B31.3, Petroleum Refinery Piping
B31.7, Code for Pressure Piping, Nuclear Power Piping
N45.2.6, Qualifications of Inspection, Examination, and Testing
Personnel for Construction Phase of Nuclear Power Plants
Y32.17, Nondestructive Testing Symbols
API
API SA, Specification
for Casing, Tubing, and Drill Pipe
API SAC, Specification for Restricted Yield Strength Casing and Tubing
API SAX, Specification for High Strength Casing, Tubing, and Drill Pipe
API 5L, Specification for Line Pipe
API 5LS, Specification for Spiral Weld Line Pipe
API 5LU, Specification for Ultra High-Test Heat Treated Line Pipe
API 5LX, Specification for High Test Line Pipe
API RP 5A5, Recommended Practice for the Field Inspection of New Casing,
Tubing, and Plain End Drill Pipe
ASME
Sec. I, Boiler and
Pressure Vessel Code, Power Boilers
Sec. II, Boiler and Pressure Vessel Code
Sec. III, Boiler and Pressure Vessel Code, Nuclear Vessels
Sec. V, Boiler and Pressure Vessel Code, Nondestructive Examination
Sec. VIII, Div. 1, Boiler and Pressure Vessel Code, Unfired Pressure
Vessels
Sec. VIII, Div. 2, Boiler and Pressure Vessel Code, Alternative Rules
for Pressure Vessels
See. XI, Boiler and Pressure Vessel Code, Rules for In-Service
Inspection of Nuclear Power Plant Components
ASNT
Recommended Ultrasonic
Acceptance Standards for Airframe Aluminum Alloy Plate, Forgings, and
Extrusions
ASTM
Proposed Practice for
Evaluating the Characteristics of Ultrasonic Search Units
Proposed Practice for Evaluating the Electronic Characteristics of
Sections of Pulse-Echo Ultrasonic Inspection Instruments
Proposed Recommended Practice for the Detection and Evaluation of
Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using
Longitudinal Waves
A21, Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway
Use
A376, Specifications for Seamless Austenitic Steel for High Temperature
Control Station Service
A388, Ultrasonic Examination of Heavy Steel Forgings
A418, Ultrasonic Inspection of Turbine and Generator Steel or Forgings
A435, Straight-Beam Ultrasonic Examination of Steel Plates for Pressure
Vessels
A450, General Requirements for Carbon, Ferrite Alloy, and Austenitic
Alloy Steel Tubes
A503, Ultrasonic Examination of Large Forged Crankshafts
A531, Ultrasonic Inspection of Turbine-Generator Steel Retaining Rings
A556, Standard Specification for Seamless Cold-Drawn Carbon Steel
Feedwater Heater Tubes
A557, Standard Specification for Electric-Resistance Welded Carbon Steel
Feedwater Heater Tubes
A577, Ultrasonic, Angle-Beam Examination of Steel Plates
A578, Straight-Beam Wave Ultrasonic Examination of Plain and Clad Steel
Plates for Special Applications
A609, Longitudinal Beam Ultrasonic Inspection of Carbon and Low-Alloy
Steel Castings
A745, Ultrasonic Examination of Austenitic Steel Forgings
B548, Specification for Standard Method for Ultrasonic Inspection of
Aluminum Alloy Plate for Pressure Vessels
B594, Ultrasonic Inspection of Aluminum-Alloy Products for Aerospace
Applications
C597, Test Method for Pulse Velocity through Concrete
D2845, Test Method for Pulse Velocities and Ultrasonic Elastic Constants
of Rock, Laboratory Determination of
D2966, Test Method for Cavitation Erosion-Corrosion Characteristics of
Aluminum in Engine Coolants Using Ultrasonic Energy
E114, Recommended Practice for Ultrasonic Pulse-Echo Straight-Beam
Testing by the Contact Method
E127, Fabricating and Checking Aluminum Alloy Ultrasonic Standard
Reference Blocks
El64, Ultrasonic Contact Inspection of Weldments
E213, Ultrasonic Inspection of Metal Pipe and Tubing for Longitudinal
Discontinuities
E214, Immersed Ultrasonic Testing by the Reflection Method Using Pulsed
Longitudinal Waves
E273, Ultrasonic Inspection of Longitudinal and Spiral Welds of Welded
Pipe and Tubing
E317, Evaluating Performance Characteristics of Ultrasonic Pulse-Echo
Testing Systems without the Use of Electronic Measurement Instruments
E428, Fabrication and Control of Steel Reference Blocks Used in
Ultrasonic Inspection
E453, Recommended Practice for Examination of Fuel Element Cladding
Including the Determination of the Mechanical Properties
E494, Measuring Ultrasonic Velocity in Materials
E500, Standard Definitions of Terms Relating to Ultrasonic Testing
E587, Ultrasonic Angle Beam Examination by the Contact Method
E588, Detection of Large Inclusions in Bearing Quality Steel by the
Ultrasonic Method
E664, Measurement of the Apparent Attenuation of Longitudinal Ultrasonic
Waves by Immersion Method
E797, Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
E804, Calibration of an Ultrasonic Test System by Extrapolation between
Flat-Bottom Hole Sizes
F600, Nondestructive Ultrasonic Evaluation of Socket and Butt Joints of
Thermoplastic Piping
G46, Recommended Practice for Examination and Evaluation of Pitting
Corrosion
AWS
A2.4, Nondestructive
Testing Symbols
Dl, Structural Welding Code
VISUAL
API
API 5A, Specification
for Casing, Tubing, and Drill Pipe
API 5AC, Specification for Restricted Yield Strength Casing and Tubing
API 5AX, Specification for High Strength Casing, Tubing, and Drill Pipe
API 5L, Specification for Line Pipe
API 5LS, Specification for Spiral Weld Line Pipe
API 5LU, Specification for Ultra High-Test Heat Treated Line Pipe
API 5LX, Specification for High Test Line Pipe
API RP 5A5, Recommended Practice for the Field Inspection of New Casing,
Tubing, and Plain End Drill Pipe
|
|
